Redi Poxy - Epoxy Adhesive - 3 Sizes

Size *

Redi Poxy Adhesive is an epoxy adhesive that will bond to most sound and clean surfaces. Redi Poxy Adhesive comes with the purchase of any Tile Redi Shower Base. Tile Redi Niches are made out of the same waterproof polyurethane material that the Tile Redi Pans are made of. We offer the Redi Poxy adhesive just in case you may need extra adhesive for your pans, benches, or niches.

What comes with Redi Poxy?

Redi Poxy consists of 1 pouch of Part A Resin, 1 pouch of Part B Hardener, and is activated with 1 bag of Part C Filler Powder and come in 3 sizes; 6 lb set, 9 lb set, & 12lb set.

How do you mix the Redi Poxy Epoxy Adhesive?

Simply pour parts A and B into a clean pail or bucket and mix thoroughly. Add Part C and mix til you have a smooth trowelable consistency. Adhesive is ready for use immediately after mixing all parts together.

How do I apply the Redi Poxy Epoxy Adhesive?

Redi Poxy can be applied directly to the Tile Redi Shower Bases and Redi Shower Shelves for immediate tile installation. Apply the Redi Poxy to the surface of the work area after the surface has been cleaned. Use the flat side of your trowel to work the adhesive into your surface by pressing firmly to the work space. Apply additional adhesive with the notched side of the trowel and set your tile.

Approximate Coverage:

  • 1/8" Square notched trowel - 45-55 sq. ft. of coverage (based off 12 lb set)
  • 1/4" Square notched trowel - 15-18 sq. ft. of coverage (based off 12 lb set)

Suitable Substrates where Redi Poxy can be used:

  • Concrete
  • Ceramic and stone tiles
  • Exterior glue plywood
  • Concrete masonry
  • Brick masonry
  • Non-water soluble cut-back adhesive
  • Vinyl or other resilient tile
  • Cement mortar beds
  • Gypsum Wallboard
  • Cement Plaster
  • Cement Terrazzo
  • Plastic Laminate
  • Cement Backer Board
  • Steel
Redi Poxy has been tested and meets or exceeds the bonding requirements established by the Tile Council of North America, Inc.

Recently Viewed Products